Wet Packs After Sterilization: Load Problem or Service Issue?
How clinical engineering and sterile processing teams diagnose autoclave wet packs, separating load defects from equipment faults and wet steam issues.
By
Category
Repair Operations
Intake, diagnosis, repair, testing, and return-to-service workflows.
Medical Suction Pump Faults: Equipment or Disposable Circuit?
Separate a running medical suction pump fault from a disposable-circuit fault with that model's own test, and stop at the qualified-service line.
By
Powered Exam Tables: What a Repair Handover Should Include
A clinical engineering guide to powered exam table repair handovers: operator-safe checks, fault evidence capture, Midmark 630 escalation, and return-to-service testing.
By
Electric Handpiece Repairs: Motor, Cable, or Control Unit?
Isolate electric dental handpiece cutouts, torque loss, and error codes across motor, cord, control unit, and operatory utility lines before dispatching repairs.
By
Oxygen Concentrator Service: What to Verify Before Return
A clinical engineering guide to servicing stationary oxygen concentrators: filter replacement schedules, alarm threshold interpretation, analyzer purity testing, and fire recall escalation.
By
Rigid Endoscope Damage: Repair Assessment and Image Checks
Assess rigid endoscope damage across rod-lens, fluorescence, and fiber optics. Distinguish model-specific take-out-of-service findings from cable discard rules, tester defaults, and remanufacturing risks.
By
Autoclave Door Gaskets: Confirming the Correct Replacement
Match the autoclave door gasket to the model and serial parts list, then follow that model's orientation and lubricant rule. STERIS and Melag leak numbers, Bowie-Dick tests, and CDC's three-cycle qualification apply only when that sterilizer and that repair call for them.
By
Dental Handpiece Repair: What a Service Quote Should Specify
An evidence-based guide for clinical engineering and dental teams on specifying and approving third-party dental handpiece repair quotes, benchmarked against FDA 510(k) acceptance criteria.
By
Surgical Instrument Sharpening: Inspecting the Returned Set
How sterile processing and biomed teams inspect, function-test, and document surgical instruments returned from vendor sharpening before release to sterile supply.
By
An Endoscope Fails Its Leak Test: What to Record Before Service
When a flexible endoscope fails leak testing, capture device identity, tester calibration, bubble or gauge evidence, and point-of-use traceability before sending it for qualified repair.
By
Hospital Bed Repairs: Brake, Rail, and Movement Checks
Take a hospital bed out of service when IFU or recall checks fail for brakes, steering, rail latches, or uncommanded motion. Here are the model-specific checks and FDA Zone 1–4 limits.
By
AestheticMedGuide: Service Evidence to Request When a Used Laser Changes Hands
A clinical engineering evidence framework for evaluating a resold aesthetic laser, separating inspectable sale inventory from retained service records and unresolved manufacturer gaps.
By